PalmControl TrueCenter®
CamLock® Vise
Smooth and Accurate
Locating Vise
Keep your engraving location in view and centered.
Made in Nebraska, USA!
PalmControl
TrueCenter CamLock
Features a solid stainless steel slide plate that is hardened to 58RC for
a lifetime of durability! The jaws
incorporate threaded holes in the tops and faces for
customization. For example: the multi-coin jaws
will screw to the jaws, or another example: make yourself wood
jaws with leather faces to screw to the top for holding knives..etc. Included
with the vise is a Self-Holding
T-Wrench, Allen wrench and10 pins. 12.5 lbs.
PalmControl CamLock Vise Complete and with
Self-Holding T-Wrench, Allen wrench and 10 pins
$2000
Vises on this page are only sold to
the general public a few at a time. No pre-orders. It is
first come first serve. Watch our instagram page for
help when more are ready and to hear notices when we have increased
the stock quantity up from 0 (zero) so that orders can be taken.
https://www.instagram.com/lindsayengraving/ If you try and add one to your cart
with the above button
but the
cart says zero (0), it means they are out of stock.
Weights left to right, 10lbs,
12.5lbs and 14.5lbs
The PalmControl TrueCenter CamLock
has a slide plate that hardened to 58RC stainless for a lifetime of durability. The jaws
incorporate threaded holes in the tops and faces for
customization. For example the multi-coin jaws
will screw to the jaws. Includes wrench, 10 pins.
PalmControl CamLock Top Assembly
If you own a PalmControl vise already you can remove the jaws
from it and replace them with the TrueCenter CamLock Top assembly.
PalmControl TrueCenter CamLock
Top assembly. (This is only the CamLock top assembly as
pictured on the left. You use your own PalmControl vise
that sets under it as is pictured on the right.) Total
weight when put together with your PalmControl vise with the
CamLock is 14.5lbs.
The TrueCenter CamLock vise is attached to a
traditional ball base. It is supplied with fasteners to fit
a PalmControl Vise. On
request other fasters can be custom made for other ball bases.
Jaws are reversible and heat treated stainless.
PalmControl TrueCenter CamLock Complete Available standard height and a lowered version.
PalmControl TrueCenter CamLock Complete. Weight 12.5 lbs PalmControl CamLock Vise Complete and with
Self-Holding T-Wrench $1237.00
Self-Holding T Wrench for PC Vise, and PC CamLock vise.
(wrench only) $46.00
Round Brass Knurl Wrench for PC Vise, and PC CamLock
vise. (wrench only) $24.00
Lowered Modification
(Out of stock) The lowering modification shortens the height 5/8".
The total height from bench top to top of the jaws with the
lowered modification is 4.5 inches and weight 10 lbs.
CamLock Jaw accessories
These will fit
either of the two sizes of CamLock vise jaws (Goliath and
PalmControl CamLock). Scroll down to see examples of
accessories installed.
CamLock Vise jaw
plates and accessories
as pictured above with six finger Cosmos collet $135
CamLock Vise jaw
plates and accessories
as pictured above with twelve finger Cosmos collet $147
Purchase
separately
Jaw Plate A $41
Jaw Plate B $38
Centers Long $14
Centers Short $12
Cosmos Collet brass 6 fingers $25
Cosmos Collet brass 12 fingers $35
Nylon Washers $3
.gif){kind=small}
